Skip to content

Lake County Fire and EMS Frequencies

Lake County in California has 7 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 15 cities and communities below for local fire departments and EMS agencies.

About Lake County Fire and EMS Frequencies

Quick answer: Fire dispatch for Lake County: Lake County Fire 155.0250 MHz, narrow FM, 88.5 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Lake County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Lake County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lake County FireDispatch "Red"155.0250
In 154.0550
88.5 PLFMNKUJ590

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Lake County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lake County FireTactical "Blue"154.175088.5 PLFMNWNKT834
Lake County FireTactical "Gray"154.190088.5 PLFMNKUX412
Lake County FireTactical "Yellow"154.235088.5 PLFMNWNKT834
Lake County FireTactical "Green"155.025088.5 PLFMNWNGA241
Lake County FireNorth155.7075
In 159.1050
162.2 PLFMNWQNF502
Lake Pillsbury Fire Protection DistrictLake Pillsbury Fire Protection District – Tactical Channel151.625088.5 PLFMN—

Radio system sites in Lake County

Program the control channel first; your scanner finds the voice channels from it.

Seigler Mountain VHF · California Radio Interoperable System (CRIS)
RFSS 1 · Site 112 (hex 70) · NAC 9D2
Control 154.3325, 155.1825, 155.3925
Voice 155.6025
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Lake County

Common questions

What frequency does the fire department use in Lake County?

Fire dispatch channels listed for Lake County: Lake County Fire 155.0250 MHz, narrow FM, 88.5 PL.

What scanner do I need to listen to fire and EMS in Lake County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Lake County?

For Lake County, start with the Seigler Mountain VHF site of California Radio Interoperable System (CRIS). Its control channels are 154.3325, 155.1825, 155.3925 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Lake County fire and EMS frequencies encrypted?

None of the 7 conventional frequencies listed for Lake County are marked encrypted.