Skip to content

Willows Fire and EMS Frequencies

Willows in Glenn County, California has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Simulcast (Chico), about 25 miles away.

About Willows Fire and EMS Frequencies

Quick answer: Fire dispatch for Willows: Willows Fire 151.1000 MHz, FM, 156.7 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Willows conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Willows
AgencyDescriptionFrequency (MHz)ToneModeFCC
Willows FireWillows Fire – Dispatch151.1000
In 156.2400
156.7 PLFMWQJM344

Glenn County channels that also cover Willows

Fire Dispatch

Fire Dispatch frequencies for Glenn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Glenn County FireGlenn County Fire – Dispatch154.4000
In 158.8350
100.0 PLFMNWPMG314

EMS Tactical

EMS Tactical frequencies for Glenn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Enloe Medics and Westside AmbulanceEnloe Medics and Westside Ambulance463.0250
In 468.0250
141.3 PLFMNKNHG374

Nearest trunked radio sites

Distances are measured from the center of Willows.

Simulcast · Chico
RFSS 1 · Site 1 (hex 1) · NAC BC1 · about 25 mi away
Control 854.975, 855.75, 856.025
Voice 856.275
Bloomer Hill · California Radio Interoperable System (CRIS)
RFSS 1 · Site 9 (hex 9) · NAC 9D9 · about 40 mi away
Control 770.20625, 770.94375, 773.54375, 773.81875
Voice 774.28125, 774.79375
Bald Mountain · California Radio Interoperable System (CRIS)
RFSS 1 · Site 8 (hex 8) · NAC 9D8 · about 50 mi away
Control 769.90625, 770.16875, 770.46875, 770.69375
Voice 770.96875, 773.84375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Willows?

Fire dispatch channels listed for Willows: Willows Fire 151.1000 MHz, FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Willows?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Willows?

For Willows, start with the Simulcast site of Chico. Its control channels are 854.975, 855.75, 856.025 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Willows fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Willows are marked encrypted.