Skip to content

Alpine County Fire and EMS Frequencies

Alpine County in California has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Alpine County Fire and EMS Frequencies

Quick answer: Fire dispatch for Alpine County: Alpine County Fire 153.8000 MHz, narrow FM, 107.2 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Alpine County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Alpine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alpine County FirePublic Safety Repeater153.8000
In 154.1000
107.2 PLFMNKDX516

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Alpine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alpine County FirePublic Safety Direct153.8000CSQFMNKDX516
Alpine County FireSAR Tactical155.1600CSQFMN—

Radio system sites in Alpine County

Program the control channel first; your scanner finds the voice channels from it.

Leviathan Peak · California Radio Interoperable System (CRIS)
RFSS 1 · Site 60 (hex 3C) · NAC 9D0
Control 151.1975, 151.4525
Voice 154.2425, 155.1825
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Alpine County

Common questions

What frequency does the fire department use in Alpine County?

Fire dispatch channels listed for Alpine County: Alpine County Fire 153.8000 MHz, narrow FM, 107.2 PL.

What scanner do I need to listen to fire and EMS in Alpine County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Alpine County?

For Alpine County, start with the Leviathan Peak site of California Radio Interoperable System (CRIS). Its control channels are 151.1975, 151.4525 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Alpine County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Alpine County are marked encrypted.