Skip to content

Plainview Fire and EMS Frequencies

We do not have frequencies listed specifically for Plainview in Yell County, Arkansas yet. Countywide channels for Yell County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Nimrod (Arkansas Wireless Information Network (AWIN)), about 13 miles away.

About Plainview Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Plainview: Yell County Fire 154.2950 MHz, narrow FM, 103.5 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Yell County channels that also cover Plainview

Fire Dispatch

Fire Dispatch frequencies for Yell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Yell County FireYell County Fire – Rural Dispatch154.2950
In 159.0600
103.5 PLFMNWNXK754

EMS Tactical

EMS Tactical frequencies for Yell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Yell County EMS Expired: Expired 4/24Yell County EMS – Tactical Channel (Dispatched on County Fire )155.3850
In 150.7750
CC 1 · TG 10 · SL 1DMRWPGG860

Nearest trunked radio sites

Distances are measured from the center of Plainview.

Nimrod · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 25 (hex 19) · NAC 180 · about 13 mi away
Control 852.7375, 853.75
Voice 851.3, 851.575, 852.3
Dutch Creek · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 63 (hex 3F) · NAC 181 · about 14 mi away
Control 853.675, 853.925
Voice 851.25, 852.475, 853.425
Russellville · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 24 (hex 18) · NAC 180 · about 22 mi away
Control 769.68125, 770.43125
Voice 770.93125, 773.55625, 774.55625, 774.80625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Plainview?

We do not have a fire dispatch channel listed specifically for Plainview. The county-level fire dispatch channels in the same county: Yell County Fire 154.2950 MHz, narrow FM, 103.5 PL.

What scanner do I need to listen to fire and EMS in Plainview?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Plainview?

For Plainview, start with the Nimrod site of Arkansas Wireless Information Network (AWIN). Its control channels are 852.7375, 853.75 MHz. Program a control channel first; the scanner finds the voice channels from it.