About Scott County Fire and EMS Frequencies
Quick answer: Fire dispatch for Scott County: Black Fork / Mena Fire 154.1300 MHz, narrow FM, no tone; Y City Fire 154.3700 MHz, narrow FM, no tone.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Scott County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Black Fork / Mena Fire | Black Fork / Mena Fire – Dispatch /Operations | 154.1300 In 158.7450 | FMN | WQPH990 | |
| Y City Fire | Y City Fire – Dispatch | 154.3700 In 159.1350 | FMN | WQEF987 |
Radio system sites in Scott County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Scott County
Common questions
What frequency does the fire department use in Scott County?
Fire dispatch channels listed for Scott County: Black Fork / Mena Fire 154.1300 MHz, narrow FM, no tone; Y City Fire 154.3700 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Scott County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Scott County?
For Scott County, start with the Poteau (Waldron) site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.625, 851.875, 853.0875, 853.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Scott County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Scott County are marked encrypted.