Skip to content

Prairie County Fire and EMS Frequencies

Prairie County in Arkansas has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Prairie County Fire and EMS Frequencies

Quick answer: Fire dispatch for Prairie County: Prairie County Fire 155.8650 MHz, narrow FM, 023 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Prairie County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Prairie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prairie County FireOEM/Fire – Dispatch155.8650
In 158.8800
023 DPLFMNWPXK649
Prairie County FireGeorgetown Fire460.5500
In 465.5500
FMNWNYW781

Radio system sites in Prairie County

Program the control channel first; your scanner finds the voice channels from it.

De Valls Bluff · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 60 (hex 3C) · NAC 188
Control 851.1875, 851.4375
Voice 852.2875, 853.6, 853.9125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Prairie County

Common questions

What frequency does the fire department use in Prairie County?

Fire dispatch channels listed for Prairie County: Prairie County Fire 155.8650 MHz, narrow FM, 023 DPL.

What scanner do I need to listen to fire and EMS in Prairie County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Prairie County?

For Prairie County, start with the De Valls Bluff site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.1875, 851.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Prairie County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Prairie County are marked encrypted.