Skip to content

Pike County Fire and EMS Frequencies

Pike County in Arkansas has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Pike County Fire and EMS Frequencies

Quick answer: Fire dispatch for Pike County: Pike County Fire 154.1900 MHz, narrow FM, 146.2 PL. EMS dispatch for Pike County: Pike County EMS 153.9200 MHz, narrow FM, 131.8 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
  • 3 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Pike County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County FirePike County Fire – Dispatch (County)154.1900
In 159.0600
146.2 PLFMNWQCY587

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County FirePike County Fire – North (County)154.1900
In 159.0600
CC 2 · TG 24 · SL 1DMR EncryptedWQCY587
Pike County FirePike County Fire – South (County)154.1900
In 159.0600
CC 1 · TG 25 · SL 1DMR EncryptedWQCY587
Pike County FireDelight Fire – Tactical154.1900
In 159.0600
CC 3 · TG 26 · SL 1DMR EncryptedWQCY587

EMS Dispatch

EMS Dispatch frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County EMSRegional Med Transport153.9200
In 158.8950
131.8 PLFMNWNGV828

Radio system sites in Pike County

Program the control channel first; your scanner finds the voice channels from it.

Delight · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 21 (hex 15) · NAC 182
Control 852.7, 852.95
Voice 851.125, 851.375, 851.7875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Pike County

Common questions

What frequency does the fire department use in Pike County?

Fire dispatch channels listed for Pike County: Pike County Fire 154.1900 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Pike County?

EMS dispatch channels listed for Pike County: Pike County EMS 153.9200 MHz, narrow FM, 131.8 PL.

What scanner do I need to listen to fire and EMS in Pike County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Pike County?

For Pike County, start with the Delight site of Arkansas Wireless Information Network (AWIN). Its control channels are 852.7, 852.95 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pike County fire and EMS frequencies encrypted?

3 of the 5 conventional frequencies listed for Pike County are marked encrypted; a scanner cannot decode encrypted audio.