About Newton County Fire and EMS Frequencies
Quick answer: Fire dispatch for Newton County: Newton County Fire 155.1225 MHz, DMR, CC 4 · TG 13 · SL 1 (expired). EMS dispatch for Newton County: Newton County EMS 155.2800 MHz, narrow FM, no tone.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
- 6 entries are marked expired, so they may no longer be in use.
Data updated .
Newton County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Newton County Fire Expired: Expired 6/24 | Newton County Fire – Shiloh Mountain | 155.1225 In 156.0375 | CC 4 · TG 13 · SL 1 | DMR | WQUE277 |
| Newton County Fire Expired: Expired 6/24 | Newton County Fire – Jasper Mountain | 155.6025 In 154.1075 | CC 2 · TG 12 · SL 1 | DMR | WQUE277 |
| Newton County Fire Expired: Expired 6/24 | Newton County Fire – J. George Mountain | 155.6625 In 156.0075 | CC 6 · TG 14 · SL 1 | DMR | WQUE277 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Newton County Fire Expired: Expired 6/24 | Newton County Fire – Shiloh Mountain Interop <b> | 155.1225 In 156.0375 | 311 DPL | FMN | WQUE277 |
| Newton County Fire Expired: Expired 6/24 | Newton County Fire – Jasper Mountain Interop | 155.6025 In 154.1075 | 465 DPL | FMN | WQUE277 |
| Newton County Fire Expired: Expired 6/24 | Newton County Fire – J. George Interop | 155.6625 In 156.0075 | 612 DPL | FMN | WQUE277 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Newton County EMS | N AR Regional EMS – Secondary Dispatch | 155.2800 | FMN | WPWZ440 | |
| Newton County EMS | N AR Regional EMS – Dispatch | 155.3850 In 150.7900 | 141.3 PL | FMN | WPWZ440 |
Radio system sites in Newton County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Newton County
Common questions
What frequency does the fire department use in Newton County?
Fire dispatch channels listed for Newton County: Newton County Fire 155.1225 MHz, DMR, CC 4 · TG 13 · SL 1 (expired).
What frequency does EMS or the ambulance service use in Newton County?
EMS dispatch channels listed for Newton County: Newton County EMS 155.2800 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Newton County?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Newton County?
For Newton County, start with the Swain site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.8625, 852.1375, 852.65 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Newton County fire and EMS frequencies encrypted?
None of the 8 conventional frequencies listed for Newton County are marked encrypted.