Skip to content

Roe Fire and EMS Frequencies

We do not have frequencies listed specifically for Roe in Monroe County, Arkansas yet. Countywide channels for Monroe County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Preston Ferry (Casscoe) (Arkansas Wireless Information Network (AWIN)), about 8 miles away.

About Roe Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Roe: Monroe County Fire 154.2650 MHz, narrow FM, no tone. Trunked: Arkansas Wireless Information Network (AWIN), for example Monroe County Fire talkgroup 53893 (hex d285).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Arkansas Wireless Information Network (AWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Roe, start with the Preston Ferry (Casscoe) site of Arkansas Wireless Information Network (AWIN), about 8 miles away. Its control channels: 769.30625, 770.33125 MHz.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Monroe County channels that also cover Roe

Fire Dispatch

Fire Dispatch frequencies for Monroe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Monroe County FireClarendon Fire154.2650
In 150.8050
FMNWPLT324
Monroe County Fire Expired: Expired 11/23Holly Grove Fire154.4225FMNWPMR252

Arkansas Wireless Information Network (AWIN)

Arkansas Wireless Information Network (AWIN) talkgroups
AgencyDescriptionTalkgroupHexMode
Monroe County FireMonroe County Fire – Dispatch53893d285T

Nearest trunked radio sites

Distances are measured from the center of Roe.

Preston Ferry (Casscoe) · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 25 (hex 19) · NAC 185 · about 8 mi away
Control 769.30625, 770.33125
Voice 771.03125, 771.60625, 772.10625
De Valls Bluff · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 60 (hex 3C) · NAC 188 · about 13 mi away
Control 851.1875, 851.4375
Voice 852.2875, 853.6, 853.9125
De Witt · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 3 (hex 3) · NAC 184 · about 22 mi away
Control 851.05, 851.3375
Voice 851.625, 853.5125, 853.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Roe?

We do not have a fire dispatch channel listed specifically for Roe. The county-level fire dispatch channels in the same county: Monroe County Fire 154.2650 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Roe?

Yes. The county-level systems that cover Roe are Fire and EMS talkgroups are listed for Arkansas Wireless Information Network (AWIN): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Roe?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Roe?

For Roe, start with the Preston Ferry (Casscoe) site of Arkansas Wireless Information Network (AWIN). Its control channels are 769.30625, 770.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.