Skip to content

Miller County Fire and EMS Frequencies

Miller County in Arkansas has 3 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Miller County Fire and EMS Frequencies

Quick answer: Fire dispatch for Miller County: Miller County Fire 156.2250 MHz, narrow FM, 155 DPL. Trunked: Arkansas Wireless Information Network (AWIN), for example Miller County Fire talkgroup 26019 (hex 65a3).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Arkansas Wireless Information Network (AWIN): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Miller County, start with the Brightstar site of Arkansas Wireless Information Network (AWIN). Its control channels: 851.2375, 851.7625 MHz.
  • 2 entries are marked expired, so they may no longer be in use.

Data updated .

Miller County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Miller County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Miller County Fire Expired: Expired 10/14Miller County Fire – Dispatch (Countywide)154.4300
In 159.0750
156.7 PLFMNWPIN547
Miller County FireMiller County Fire – Paging (Countywide)156.2250
In 153.8000
155 DPLFMNWQKY467

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Miller County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Miller County Fire Expired: Expired 10/14Miller County Fire – Fire Ground (Countywide)154.4300
In 159.0750
192.8 PLFMNWPIN547

Miller County trunked talkgroups

Arkansas Wireless Information Network (AWIN)

Arkansas Wireless Information Network (AWIN) talkgroups
AgencyDescriptionTalkgroupHexMode
Miller County FireCounty Fireground2601965a3D
Miller County FireCounty Fireground2602065a4D
Miller County EMSCounty Fire – First Responders2601865a2D

Radio system sites in Miller County

Program the control channel first; your scanner finds the voice channels from it.

Brightstar · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 1 (hex 1) · NAC 188
Control 851.2375, 851.7625
Voice 853.1875, 853.4875, 853.7625
Wolfe Mountain · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 17 (hex 11) · NAC 184
Control 856.9375, 857.9375
Voice 857.6625, 858.9375, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Miller County

Common questions

What frequency does the fire department use in Miller County?

Fire dispatch channels listed for Miller County: Miller County Fire 156.2250 MHz, narrow FM, 155 DPL.

Do fire departments and EMS use a trunked radio system in Miller County?

Yes. Fire and EMS talkgroups are listed for Arkansas Wireless Information Network (AWIN): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Miller County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Miller County?

For Miller County, start with the Brightstar site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.2375, 851.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Miller County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Miller County are marked encrypted.

Are Miller County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Miller County are marked encrypted.