About Summit Fire and EMS Frequencies
Quick answer: Fire dispatch for Summit: Summit Fire 154.4000 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Summit: Marion County EMS 151.1225 MHz, NXDN48, RAN 25.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 5 conventional channels use a digital mode (P25, NXDN48), which needs a scanner that decodes those modes.
- 3 entries are marked expired, so they may no longer be in use.
Data updated .
Summit conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Summit Fire | Summit Fire – Dispatch | 154.4000 | 141.3 PL | FMN | WQZP583 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Summit Fire | Summit Fire – Tactical Channel | 154.1750 In 151.3250 | 151.4 PL | FMN | WQZP583 |
Marion County channels that also cover Summit
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marion County Fire | Lakeway Fire – Dispatch | 154.2950 | FMN | WPLX490 | |
| Marion County Fire Expired: Expired 8/24 | Marion County Fire – Operations (Central) | 155.0025 | NAC 293 | P25 | WQUM343 |
| Marion County Fire | Marion County Fire – Paging (Central) *Peel | 155.0250 In 158.7450 | 156 DPL | FMN | WQUK723 |
| Marion County Fire | Marion County Fire – Paging (East) *Flippin | 155.0250 In 158.7450 | 162 DPL | FMN | WQUK723 |
| Marion County Fire | Marion County Fire – Paging *Summit | 155.6475 In 153.7775 | 134 DPL | FMN | WQUK723 |
| Marion County Fire | Marion County Fire – Paging *Peel | 158.7675 In 154.2200 | 131 DPL | FMN | WQUK723 |
| Marion County Fire | Marion County Fire – Operations (East) *Flippin | 158.8425 | NAC 293 | P25 | WQUK723 |
| Marion County Fire Expired: Expired 8/24 | Marion County Fire – Operations (West) | 159.1275 | NAC 293 | P25 | WQUM343 |
| Peel Fire | Peel Fire – Dispatch | 155.6850 In 159.0075 | 131 DPL | FMN | WPMA445 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Peel Fire | Peel Fire – Tactical Channel | 154.3700 | FMN | WPMA445 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marion County EMS | Baxter Regional Medical Center EMS – Operations | 151.1225 | RAN 25 | NXDN48 | WRB586 |
| Marion County EMS Expired: Expired | Marion County EMS – Dispatch *Bull Shoals | 154.2500 | 205 DPL | FMN | — |
| Marion County EMS | Baxter Regional Medical Center EMS – Main | 155.3250 | NXDN48 | WRB586 |
Nearest trunked radio sites
Distances are measured from the center of Summit.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Summit?
Fire dispatch channels listed for Summit: Summit Fire 154.4000 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Summit?
We do not have a EMS dispatch channel listed specifically for Summit. The county-level EMS dispatch channels in the same county: Marion County EMS 151.1225 MHz, NXDN48, RAN 25.
What scanner do I need to listen to fire and EMS in Summit?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25, NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Summit?
For Summit, start with the Tar Kiln (Pyatt) site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.9, 852.175 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Summit fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Summit are marked encrypted.