Skip to content

Grubbs Fire and EMS Frequencies

Grubbs in Jackson County, Arkansas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Jonesboro (Arkansas Wireless Information Network (AWIN)), about 22 miles away.

About Grubbs Fire and EMS Frequencies

Quick answer: Fire dispatch for Grubbs: Grubbs Fire 154.9875 MHz, narrow FM, CSQ. County-level ems dispatch that covers Grubbs: Hospitals / EMS 155.2050 MHz, narrow FM, no tone.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Grubbs conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Grubbs
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grubbs FireGrubbs Fire – Dispatch154.9875
In 153.7925
CSQFMNWQEU669

Jackson County channels that also cover Grubbs

EMS Dispatch

EMS Dispatch frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hospitals / EMSHospitals / EMS – Dispatch155.2050FMNKXZ555

Hospitals & Medical

Hospitals & Medical frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hospitals / EMSNewport Harris Hospital ER (SERN)155.3400CSQFMNWSL780

Nearest trunked radio sites

Distances are measured from the center of Grubbs.

Jonesboro · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 70 (hex 46) · NAC 182 · about 22 mi away
Control 856.1375, 856.9875, 859.9875, 860.9875
Voice 851.65, 853.675, 856.2875, 857.2875, 857.9875, 858.9875
Harrisburg 700 · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 74 (hex 4A) · NAC 184 · about 22 mi away
Control 771.55625, 772.18125
Voice 769.78125, 770.53125, 771.18125, 772.60625, 772.88125, 774.88125
Oakland · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 56 (hex 38) · NAC 187 · about 23 mi away
Control 851.7375, 852.075, 860.9375
Voice 853.1375, 856.9375, 857.9375, 858.9375, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Grubbs?

Fire dispatch channels listed for Grubbs: Grubbs Fire 154.9875 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Grubbs?

We do not have a EMS dispatch channel listed specifically for Grubbs. The county-level EMS dispatch channels in the same county: Hospitals / EMS 155.2050 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Grubbs?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Grubbs?

For Grubbs, start with the Jonesboro site of Arkansas Wireless Information Network (AWIN). Its control channels are 856.1375, 856.9875, 859.9875, 860.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Grubbs fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Grubbs are marked encrypted.