About Franklin County Fire and EMS Frequencies
Quick answer: Fire dispatch for Franklin County: Franklin County Fire 158.8350 MHz, narrow FM, 136.5 PL. EMS dispatch for Franklin County: Franklin County EMS 151.3625 MHz, narrow FM, 100.0 PL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Franklin County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin County Fire | Franklin County Fire – Dispatch | 158.8350 In 156.0000 | 136.5 PL | FMN | WPMK787 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin County Fire | County Fireboard | 152.9675 In 159.7275 | DMR | WQPV807 | |
| Franklin County Fire | Fireground C | 154.9875 | 136.5 PL | FMN | WPMK787 |
| Franklin County Fire | Fireground B | 155.0925 | 136.5 PL | FMN | WPMK787 |
| Franklin County Fire | Fireground A | 156.0225 | 136.5 PL | FMN | WPMK787 |
| Franklin County Fire | County Fire – Primary Operations | 158.8350 In 156.0000 | CC 1 · TG * · SL 1 | DMR | WPMK787 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin County EMS | Franklin County EMS – Operations | 151.3625 In 159.4500 | 100.0 PL | FMN | WRCE651 |
| Franklin County EMS | Franklin County EMS – Operations | 151.3625 In 159.4500 | CC 6 · TG 11005 · SL 1 | DMR | WRCE651 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin County EMS | Franklin County EMS – Administration/Non Emergency | 153.4850 In 158.3625 | FMN | WQPU972 |
Radio system sites in Franklin County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Franklin County
Common questions
What frequency does the fire department use in Franklin County?
Fire dispatch channels listed for Franklin County: Franklin County Fire 158.8350 MHz, narrow FM, 136.5 PL.
What frequency does EMS or the ambulance service use in Franklin County?
EMS dispatch channels listed for Franklin County: Franklin County EMS 151.3625 MHz, narrow FM, 100.0 PL.
What scanner do I need to listen to fire and EMS in Franklin County?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Franklin County?
For Franklin County, start with the Fly Gap Mtn/Cass site of Arkansas Wireless Information Network (AWIN). Its control channels are 771.51875, 771.89375, 772.59375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Franklin County fire and EMS frequencies encrypted?
None of the 9 conventional frequencies listed for Franklin County are marked encrypted.