Skip to content

Cross County Fire and EMS Frequencies

Cross County in Arkansas has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Cross County Fire and EMS Frequencies

Quick answer: Fire dispatch for Cross County: Cross County Fire 155.2200 MHz, narrow FM, 156.7 PL. EMS dispatch for Cross County: Cross County EMS 154.4150 MHz, DMR, CC 10 · TG 7001 · SL 1.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Cross County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Cross County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cross County FireVanndale Fire155.2200
In 159.1350
156.7 PLFMNWPWZ441

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cross County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cross County FireBay Village Fireground (DB – Cherry Valley Fire Department)154.7100FMNWPOY251

EMS Dispatch

EMS Dispatch frequencies for Cross County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cross County EMSCross County EMS – Dispatch154.4150
In 159.3150
CC 10 · TG 7001 · SL 1DMRKNGV239

Radio system sites in Cross County

Program the control channel first; your scanner finds the voice channels from it.

Fair Oaks · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 57 (hex 39) · NAC 180
Control 851.2125, 851.4625
Voice 853.3125, 853.5625, 853.8625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Cross County

Common questions

What frequency does the fire department use in Cross County?

Fire dispatch channels listed for Cross County: Cross County Fire 155.2200 MHz, narrow FM, 156.7 PL.

What frequency does EMS or the ambulance service use in Cross County?

EMS dispatch channels listed for Cross County: Cross County EMS 154.4150 MHz, DMR, CC 10 · TG 7001 · SL 1.

What scanner do I need to listen to fire and EMS in Cross County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Cross County?

For Cross County, start with the Fair Oaks site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.2125, 851.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cross County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Cross County are marked encrypted.