Skip to content

Graham County Fire and EMS Frequencies

Graham County in Arizona has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 16 cities and communities below for local fire departments and EMS agencies.

About Graham County Fire and EMS Frequencies

Quick answer: EMS dispatch for Graham County: Lifeline Ambulance 155.1750 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Graham County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Graham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lifeline AmbulanceLifeline Ambulance – Dispatch155.1750FMNKNEE616

Radio system sites in Graham County

Program the control channel first; your scanner finds the voice channels from it.

Heliograph Peak · Arizona Wireless Integrated Network System (AZ WINS)
RFSS 2 · Site 13 (hex D) · NAC 150
Control 770.18125, 770.43125
Voice 769.18125, 769.43125, 769.68125, 769.93125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Graham County

Common questions

What frequency does EMS or the ambulance service use in Graham County?

EMS dispatch channels listed for Graham County: Lifeline Ambulance 155.1750 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Graham County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Graham County?

For Graham County, start with the Heliograph Peak site of Arizona Wireless Integrated Network System (AZ WINS). Its control channels are 770.18125, 770.43125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Graham County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Graham County are marked encrypted.