Skip to content

Ruby Fire and EMS Frequencies

We do not have frequencies listed specifically for Ruby in Yukon-Koyukuk Census Area, Alaska yet. Countywide channels for Yukon-Koyukuk Census Area that may also cover this area are shown below when we have them. The closest trunked radio site we have is Nenana (Alaska Land Mobile Radio (ALMR)), about 190 miles away.

About Ruby Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Ruby yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@scanner-frequencies.com and we'll check it against the official records.

Nearest trunked radio sites

Distances are measured from the center of Ruby.

Nenana · Alaska Land Mobile Radio (ALMR)
RFSS 2 · Site 18 (hex 12) · NAC 149 · about 190 mi away
Control 155.0375, 156.0125
Voice 155.3875
Clear · Alaska Land Mobile Radio (ALMR)
RFSS 2 · Site 12 (hex C) · about 193 mi away
Control 154.8, 154.95
Voice 155.35, 155.5, 156.15
Garner - Healy · Alaska Land Mobile Radio (ALMR)
RFSS 2 · Site 15 (hex F) · NAC 14E · about 205 mi away
Control 154.9125, 155.5375
Voice 155.9375, 156.1125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What are the control channels for trunked radio in Ruby?

For Ruby, start with the Nenana site of Alaska Land Mobile Radio (ALMR). Its control channels are 155.0375, 156.0125 MHz. Program a control channel first; the scanner finds the voice channels from it.