About Anchorage Municipality Fire and EMS Frequencies
Quick answer: Fire dispatch for Anchorage Municipality: Anchorage Municipality Fire 854.7375 MHz, narrow FM, 123.0 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Anchorage Municipality conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Anchorage Municipality Fire | Fire back-up repeater | 854.7375 In 809.7375 | 123.0 PL | FMN | WPBB244 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Anchorage Municipality Fire | Fire Simplex | 857.9375 | 91.5 PL | FMN | WNQL400 |
| Anchorage Municipality Fire | Fire Simplex | 858.2375 | 91.5 PL | FMN | WNQL400 |
| Anchorage Municipality Fire | Fire Simplex | 859.9375 | 91.5 PL | FMN | WNQL400 |
Radio system sites in Anchorage Municipality
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Anchorage Municipality
Common questions
What frequency does the fire department use in Anchorage Municipality?
Fire dispatch channels listed for Anchorage Municipality: Anchorage Municipality Fire 854.7375 MHz, narrow FM, 123.0 PL.
What scanner do I need to listen to fire and EMS in Anchorage Municipality?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Anchorage Municipality?
For Anchorage Municipality, start with the Anchorage Simulcast site of Alaska Land Mobile Radio (ALMR). Its control channels are 772.28125, 773.03125, 773.78125, 774.53125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Anchorage Municipality fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Anchorage Municipality are marked encrypted.