About Emelle Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Emelle: Alabama Forestry Commission Fire 453.1500 MHz, FM, no tone; Sumter County Fire 151.1075 MHz, narrow FM, 654 DPL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Sumter County channels that also cover Emelle
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alabama Forestry Commission Fire | Rural Fire Suppression | 453.1500 In 458.1500 | FM | WNDD327 | |
| Sumter County Fire | Fire Primary | 151.1075 In 156.1800 | 654 DPL | FMN | WNHU815 |
Nearest trunked radio sites
Distances are measured from the center of Emelle.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Emelle?
We do not have a fire dispatch channel listed specifically for Emelle. The county-level fire dispatch channels in the same county: Alabama Forestry Commission Fire 453.1500 MHz, FM, no tone; Sumter County Fire 151.1075 MHz, narrow FM, 654 DPL.
What scanner do I need to listen to fire and EMS in Emelle?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Emelle?
For Emelle, start with the Coker site of Alabama Interoperable Radio System (AIRS). Its control channels are 772.85625, 773.13125 MHz. Program a control channel first; the scanner finds the voice channels from it.