About Shelby County Fire and EMS Frequencies
Quick answer: Fire dispatch for Shelby County: Cahaba Valley Fire and EMS 154.4000 MHz, narrow FM, 156.7 PL. Trunked: Alabama Interoperable Radio System (AIRS), for example Shelby County Fire / EMA talkgroup 2953 (hex b89).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Alabama Interoperable Radio System (AIRS): 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Shelby County, start with the Shelby North Simulcast site of Alabama Interoperable Radio System (AIRS). Its control channels: 856.125, 856.6125, 857.0125 MHz.
Data updated .
Shelby County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cahaba Valley Fire and EMS | Fire/EMS Dispatch | 154.4000 In 151.1150 | 156.7 PL | FMN | KNFA343 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Shelby County Hospital | Shelby Medical Center – Patient Reporets | 155.3400 | 103.5 PL | FMN | WQOK944 |
Shelby County trunked talkgroups
Alabama Interoperable Radio System (AIRS)
System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Shelby County Fire / EMA | Shelby County Fire / EMA – Dispatch – East | 2953 | b89 | D |
| Shelby County Fire / EMA | Shelby County Fire / EMA – Dispatch – North | 2955 | b8b | D |
| Shelby County Fire / EMA | Shelby County Fire / EMA – Dispatch – West | 2957 | b8d | D |
| Shelby County Fire / EMA | Shelby County Fire / EMA – Dispatch – Southwest | 2959 | b8f | D |
| Shelby County Fire / EMA | EMA – Tactical | 2891 | b4b | D |
| Shelby County Fire / EMA | EMA – Primary | 2923 | b6b | D |
| Shelby County Interop (Countywide) | Shelby County Interop (Countywide) – Operations | 2939 | b7b | D |
| Shelby County Interop (Countywide) | Shelby County Interop (Countywide) – Operations | 2941 | b7d | D |
| Shelby County Interop (Countywide) | Shelby County Interop (Countywide) – Operations | 2943 | b7f | D |
| Shelby County Interop (Countywide) | Shelby County Interop (Countywide) – Operations | 2945 | b81 | D |
Radio system sites in Shelby County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Shelby County
- Acton
- Alabaster
- Aldrich
- Arkwright
- Birmingham
- Brantleyville
- Brook Highland
- Calcis
- Calera
- Chelsea
- Cloverdale
- Columbiana
- Dunnavant
- Eagle Point
- Fourmile
- Harpersville
- Helena
- Highland Lakes
- Hoover
- Indian Springs Village
- Inverness
- Leeds
- Maylene
- Meadowbrook
- Montevallo
- Nelson
- Pea Ridge
- Pelham
- Ryan
- Saginaw
- Shelby
- Shoal Creek
- Siluria
- Sterrett
- Vandiver
- Vestavia Hills
- Vincent
- Westover
- Wilsonville
- Wilton
Common questions
What frequency does the fire department use in Shelby County?
Fire dispatch channels listed for Shelby County: Cahaba Valley Fire and EMS 154.4000 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Shelby County?
Yes. Fire and EMS talkgroups are listed for Alabama Interoperable Radio System (AIRS): 10 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Shelby County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Shelby County?
For Shelby County, start with the Shelby North Simulcast site of Alabama Interoperable Radio System (AIRS). Its control channels are 856.125, 856.6125, 857.0125, 857.15 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Shelby County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Shelby County are marked encrypted.
Are Shelby County fire and EMS talkgroups encrypted?
None of the 10 talkgroups listed for Shelby County are marked encrypted.