About Pike County Fire and EMS Frequencies
Quick answer: Fire dispatch for Pike County: Pike County Fire 154.1300 MHz, narrow FM, no tone. Trunked: S and P Communications, for example Pike County Fire talkgroup 6100 (hex 17d4).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: S and P Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pike County, start with the Troy University (was 2-11) site of Alabama Interoperable Radio System (AIRS). Its control channels: 770.00625, 772.40625 MHz.
Data updated .
Pike County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Fire | Pike County Fire – Dispatch | 154.1300 | FMN | WNED439 | |
| Pike County Fire | Pike County Fire – Dispatch | 453.1000 In 458.1000 | 432 DPL | FMN | WNLR551 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Haynes Ambulance (Pike) | Haynes Ambulance (Pike) – Tactical Channel | 155.2050 | FMN | WNZB752 | |
| Haynes Ambulance (Pike) | Operations | 155.2350 | FMN | WNZB752 | |
| Haynes Ambulance (Pike) | Operations | 155.2950 | FMN | WNZB752 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Hospital | Troy Regional Medical Center – Patient Reports | 155.3400 | 218.1 PL | FMN | WQOL221 |
Pike County trunked talkgroups
S and P Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pike County Fire | Pike County Fire – Dispatch (County Volunteer) | 6100 | 17d4 | D |
| Private EMS Providers | Haynes EMS – Dispatch | 801 | 321 | D |
| Private EMS Providers | Haynes EMS – Events | 802 | 322 | D |
Radio system sites in Pike County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Pike County
Common questions
What frequency does the fire department use in Pike County?
Fire dispatch channels listed for Pike County: Pike County Fire 154.1300 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Pike County?
Yes. Fire and EMS talkgroups are listed for S and P Communications: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pike County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pike County?
For Pike County, start with the Troy University (was 2-11) site of Alabama Interoperable Radio System (AIRS). Its control channels are 770.00625, 772.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Pike County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Pike County are marked encrypted.
Are Pike County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Pike County are marked encrypted.