Skip to content

Axis Police Frequencies

We do not have frequencies listed specifically for Axis in Mobile County, Alabama yet. Countywide channels for Mobile County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Salco (Mobile County Communications District), about 5 miles away.

About Axis Police Frequencies

Quick answer: Trunked: Mobile County Communications District, for example Alabama State talkgroup 1124 (hex 464).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Mobile County Communications District: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Axis, start with the Salco site of Mobile County Communications District, about 5 miles away. Its control channels: 771.09375, 771.64375, 771.89375 MHz.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Mobile County channels that also cover Axis

Jails & Corrections

Jails & Corrections frequencies for Mobile County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mobile County JailMetro Jail (Channel 1)453.1875
In 458.1875
606 DPLFMNWQHE686
Mobile County JailMetro Jail (Channel 2)453.7375
In 458.7375
306 DPLFMNWQHE686

Mobile County Communications District

Mobile County Communications District talkgroups
AgencyDescriptionTalkgroupHexMode
Alabama StatePort Authority Police – Dispatch1124464D
Alabama StateTroopers20077d7T
Mobile County GovernmentJudicial Police (Courts)20397f7D
Mobile County SheriffOperations12744faD
Mobile County SheriffOperations1285505D
Mobile County GovernmentMetro Jail1029405D
Mobile County GovernmentCounty Jail41181016D
2 encrypted talkgroups (cannot be monitored)
Mobile County Communications District encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Mobile County SheriffMobile County Sheriff – Dispatch12674f3D Encrypted
Mobile County SheriffMobile County Sheriff – Dispatch12684f4D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Axis.

Salco · Mobile County Communications District
RFSS 3 · Site 3 (hex 3) · NAC 003 · about 5 mi away
Control 771.09375, 771.64375, 771.89375, 772.14375, 772.49375, 774.13125, 774.90625
Saraland · Alabama Interoperable Radio System (AIRS)
RFSS 5 · Site 5 (hex 5) · about 7 mi away
Control 773.06875, 773.31875, 773.56875, 773.81875
Bay Minette · Bay Minette, Daphne, Foley, Robertsdale
Site 2 (hex 2) · about 15 mi away
Control 453.075, 453.3375
Voice 453.5875, 453.7, 453.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do the police use a trunked radio system in Axis?

Yes. The county-level systems that cover Axis are Law-enforcement talkgroups are listed for Mobile County Communications District: 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Axis?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Axis?

For Axis, start with the Salco site of Mobile County Communications District. Its control channels are 771.09375, 771.64375, 771.89375, 772.14375 MHz. Program a control channel first; the scanner finds the voice channels from it.