About Putnam Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Putnam: Marengo County Fire 155.2650 MHz, narrow FM, 110.9 PL. County-level ems dispatch that covers Putnam: Marengo County EMS 155.4000 MHz, narrow FM, 127.3 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Marengo County channels that also cover Putnam
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marengo County Fire | South Marengo Rescue Squad VHF | 155.2650 | 110.9 PL | FMN | WFK278 |
| Marengo County Fire | Marengo County Fire – – Dispatch – Countywide (not 136.5) | 453.2000 In 458.2000 | FMN | WNGC883 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marengo County EMS | AmStar EMS – Dispatch | 155.4000 In 150.7900 | 127.3 PL | FMN | WPIS460 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marengo County EMS | Air Evac Lifeteam (no lic in county) | 153.2450 In 158.2350 | 115 DPL | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marengo County Hospital | Tombigbee Healthcare Authority – Patient Reports | 155.3400 | 82.5 PL | FMN | WQPG686 |
Nearest trunked radio sites
Distances are measured from the center of Putnam.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Putnam?
We do not have a fire dispatch channel listed specifically for Putnam. The county-level fire dispatch channels in the same county: Marengo County Fire 155.2650 MHz, narrow FM, 110.9 PL.
What frequency does EMS or the ambulance service use in Putnam?
We do not have a EMS dispatch channel listed specifically for Putnam. The county-level EMS dispatch channels in the same county: Marengo County EMS 155.4000 MHz, narrow FM, 127.3 PL.
What scanner do I need to listen to fire and EMS in Putnam?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Putnam?
For Putnam, start with the Chatom site of Mobile County Communications District. Its control channels are 771.55625, 771.83125, 772.08125, 772.43125 MHz. Program a control channel first; the scanner finds the voice channels from it.