About Langston Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Langston: Jackson County Fire 154.3400 MHz, narrow FM, 156.7 PL. County-level ems dispatch that covers Langston: Jackson County EMS 463.0750 MHz, narrow FM, 156.7 PL; Tri-Community Fire 155.3550 MHz, narrow FM, no tone.
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Jackson County channels that also cover Langston
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County Fire | Jackson County Fire – Dispatch 1A | 154.3400 In 153.8300 | 156.7 PL | FMN | WRBV210 |
| Jackson County Fire | Jackson County Fire – Dispatch 1B | 154.3400 In 153.8300 | 203.5 PL | FMN | WRBV210 |
| Jackson County Fire | Jackson County Fire – Dispatch (UHF) | 453.5500 In 458.5500 | 054 DPL | FMN | KNAU450 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Tri-Community Fire | Tri-Community Fire – Fire Ground | 155.2200 | FMN | WSOH416 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County EMS | Highlands EMS – North Dispatch (North Par) | 463.0750 In 468.0750 | 156.7 PL | FMN | WNVS329 |
| Jackson County EMS | Highlands EMS – Putnam Dispatch | 463.1250 In 468.1250 | 192.8 PL | FMN | WNVS329 |
| Jackson County EMS | Highlands EMS – South Dispatch (South Par) | 463.1750 In 468.1750 | 203.5 PL | FMN | WNVS329 |
| Tri-Community Fire | Tri-Community Fire – Dispatch | 155.3550 In 150.8050 | FMN | WSOH416 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County EMS | Highlands Medical Center – Patient Reports | 155.3400 | 179.9 PL | FMN | WQPZ543 |
Nearest trunked radio sites
Distances are measured from the center of Langston.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Langston?
We do not have a fire dispatch channel listed specifically for Langston. The county-level fire dispatch channels in the same county: Jackson County Fire 154.3400 MHz, narrow FM, 156.7 PL.
What frequency does EMS or the ambulance service use in Langston?
We do not have a EMS dispatch channel listed specifically for Langston. The county-level EMS dispatch channels in the same county: Jackson County EMS 463.0750 MHz, narrow FM, 156.7 PL; Tri-Community Fire 155.3550 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Langston?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Langston?
For Langston, start with the Marshall County Simulcast site of Alabama Interoperable Radio System (AIRS). Its control channels are 769.55625, 770.10625 MHz. Program a control channel first; the scanner finds the voice channels from it.