Skip to content

Spruce Pine Fire and EMS Frequencies

We do not have frequencies listed specifically for Spruce Pine in Franklin County, Alabama yet. Countywide channels for Franklin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Trinity (Alabama Interoperable Radio System (AIRS)), about 39 miles away.

About Spruce Pine Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Spruce Pine: Franklin County Fire 154.3700 MHz, narrow FM, 192.8 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Franklin County channels that also cover Spruce Pine

Fire Dispatch

Fire Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County FireOld Fire Net / Paging154.3700
In 156.0450
192.8 PLFMNKNAR440
Franklin County FireFranklin County Fire – West154.3700
In 159.1050
NAC 0C0P25KNAR440
Franklin County FireFranklin County Fire – Central154.3700
In 156.0450
NAC 29EP25KNAR440
Franklin County FireFranklin County Fire – East154.3700
In 159.1050
NAC 375P25KNAR440

Hospitals & Medical

Hospitals & Medical frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County HospitalRussellville Hospital – Patient Reports (HEAR)155.3400210.7 PLFMNWQOY827

Nearest trunked radio sites

Distances are measured from the center of Spruce Pine.

Trinity · Alabama Interoperable Radio System (AIRS)
RFSS 3 · Site 8 (hex 8) · NAC 468 · about 39 mi away
Control 771.21875, 771.51875, 771.76875, 772.01875
Voice 770.04375, 770.36875
Falkville · Alabama Interoperable Radio System (AIRS)
RFSS 3 · Site 10 (hex A) · NAC 46A · about 42 mi away
Control 771.44375, 771.89375, 772.24375, 773.49375
Voice 769.09375, 771.06875, 773.89375, 774.14375
Decatur · Alabama Interoperable Radio System (AIRS)
RFSS 3 · Site 7 (hex 7) · NAC 467 · about 45 mi away
Control 770.25625, 772.95625, 773.38125, 774.48125
Voice 769.30625, 769.85625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Spruce Pine?

We do not have a fire dispatch channel listed specifically for Spruce Pine. The county-level fire dispatch channels in the same county: Franklin County Fire 154.3700 MHz, narrow FM, 192.8 PL.

What scanner do I need to listen to fire and EMS in Spruce Pine?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Spruce Pine?

For Spruce Pine, start with the Trinity site of Alabama Interoperable Radio System (AIRS). Its control channels are 771.21875, 771.51875, 771.76875, 772.01875 MHz. Program a control channel first; the scanner finds the voice channels from it.