About Ider Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Ider: DeKalb County Fire/EMS 155.7750 MHz, narrow FM, 023 DPL. County-level ems dispatch that covers Ider: DeKalb County Fire/EMS 155.1750 MHz, narrow FM, 100.0 PL.
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
DeKalb County channels that also cover Ider
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| DeKalb County Fire/EMS | DeKalb County Fire/EMS – Dispatch | 155.7750 In 151.4000 | 023 DPL | FMN | KRX317 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| DeKalb County Services | County Rescue Squad Dispatch (EMA) | 155.2050 In 153.8525 | 67.0 PL | FMN | WPKF501 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| DeKalb County Fire/EMS | DeKalb County Fire/EMS – Dispatch | 155.1750 In 151.2125 | 100.0 PL | FMN | WNGY630 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| DeKalb County Fire/EMS | DeKalb County Fire/EMS – Tactical Channel | 155.1750 | 127.3 PL | FMN | WNGY630 |
| DeKalb County Fire/EMS | DeKalb County Fire/EMS – Dispatch Back-up | 155.2200 In 151.2350 | 100.0 PL | FMN | WNGY630 |
| DeKalb County Fire/EMS | Fischer Rescue Squad | 155.2950 | FMN | KB87251 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| DeKalb County Fire/EMS | DeKalb Regional Medical Center | 155.3400 | 136.5 PL | FMN | KRB629 |
| DeKalb County Fire/EMS | Patient Reports (to Dekalb Regional ER) | 159.1050 In 153.9800 | 123.0 PL | FMN | WPPX617 |
Nearest trunked radio sites
Distances are measured from the center of Ider.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Ider?
We do not have a fire dispatch channel listed specifically for Ider. The county-level fire dispatch channels in the same county: DeKalb County Fire/EMS 155.7750 MHz, narrow FM, 023 DPL.
What frequency does EMS or the ambulance service use in Ider?
We do not have a EMS dispatch channel listed specifically for Ider. The county-level EMS dispatch channels in the same county: DeKalb County Fire/EMS 155.1750 MHz, narrow FM, 100.0 PL.
What scanner do I need to listen to fire and EMS in Ider?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Ider?
For Ider, start with the Fort Payne site of Alabama Interoperable Radio System (AIRS). Its control channels are 856.0375, 856.1875 MHz. Program a control channel first; the scanner finds the voice channels from it.