About Colony Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Colony: Cullman County Fire 155.2950 MHz, narrow FM, 127.3 PL; Vinemont-Providence Fire Dept. 154.3700 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Colony: Cullman County EMS/Rescue 154.7250 MHz, P25, NAC 420.
- 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 5 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Cullman County channels that also cover Colony
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cullman County Fire | West Point Fire | 155.2950 In 153.8300 | 127.3 PL | FMN | WPAF841 |
| Cullman County Fire | West Point Fire | 155.2950 In 153.8300 | NAC 130 | P25 | WPAF841 |
| Cullman County Fire | Cullman County Fire – Dispatch – Countywide | 158.7450 In 153.9950 | 146.2 PL | FMN | WNMN460 |
| Cullman County Fire | Cullman County Fire – Dispatch – Countywide | 158.7450 In 153.9950 | NAC 146 | P25 | WNMN460 |
| Vinemont-Providence Fire Dept. | Dispatch Analog | 154.3700 In 153.8900 | 146.2 PL | FMN | WNIA968 |
| Vinemont-Providence Fire Dept. | Dispatch Digital | 154.3700 In 153.8900 | NAC 146 | P25 | WNIA968 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cullman County Fire | Berlin Fire | 154.1600 | FMN | WPKL290 | |
| Cullman County Fire | Bethsadia Fire | 155.2500 In 151.2725 | 110.9 PL | FMN | WQUD810 |
| Cullman County Fire | Johnsons Crossing Fire | 155.8950 | NAC 146 | P25 | WPUN794 |
| Cullman County Fire | Gold Ridge Fire | 157.6350 | 146.2 PL | FMN | WPGU470 |
| Cullman County Fire | Trimble Fire | 157.7100 | 131.8 PL | FMN | WQON234 |
| Cullman County Fire | Loretto Fire | 159.3675 In 154.3100 | FMN | WQRJ746 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cullman County EMS/Rescue | Cullman County EMS/Rescue – Dispatch | 154.7250 In 156.0300 | NAC 420 | P25 | KUP254 |
| Cullman County EMS/Rescue | Rescue Squad | 155.7825 In 150.7975 | 196.6 PL | FMN | WPNW785 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cullman County EMS/Rescue | Cullman County EMS/Rescue – Alternate | 155.3850 | 179.9 PL | FMN | KUP254 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cullman County EMS/Rescue | Cullman Regional Medical Center | 155.3400 | 179.9 PL | FMN | WQOV200 |
Nearest trunked radio sites
Distances are measured from the center of Colony.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Colony?
We do not have a fire dispatch channel listed specifically for Colony. The county-level fire dispatch channels in the same county: Cullman County Fire 155.2950 MHz, narrow FM, 127.3 PL; Vinemont-Providence Fire Dept. 154.3700 MHz, narrow FM, 146.2 PL.
What frequency does EMS or the ambulance service use in Colony?
We do not have a EMS dispatch channel listed specifically for Colony. The county-level EMS dispatch channels in the same county: Cullman County EMS/Rescue 154.7250 MHz, P25, NAC 420.
What scanner do I need to listen to fire and EMS in Colony?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Colony?
For Colony, start with the Warrior site of Alabama Interoperable Radio System (AIRS). Its control channels are 851.8375, 852.1125, 852.5625, 853.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.