Skip to content

Crenshaw County Fire and EMS Frequencies

Crenshaw County in Alabama has 2 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Crenshaw County Fire and EMS Frequencies

Quick answer: Fire dispatch for Crenshaw County: Crenshaw County Fire 453.5500 MHz, narrow FM, 664 DPL. Trunked: S and P Communications, for example Private EMS Providers talkgroup 801 (hex 321).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: S and P Communications: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Crenshaw County, start with the Lapine site of Montgomery Metro Communications Cooperative District. Its control channels: 851.175, 851.625, 853.525 MHz.

Data updated .

Crenshaw County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Crenshaw County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crenshaw County FireCrenshaw County Fire – Dispatch (Countywide)453.5500
In 458.5500
664 DPLFMNWNCT830

Hospitals & Medical

Hospitals & Medical frequencies for Crenshaw County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crenshaw County HospitalCrenshaw Community Hospital – Patient Reports155.3400123.0 PLFMNWQOL221

Crenshaw County trunked talkgroups

S and P Communications

S and P Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Private EMS ProvidersHaynes EMS – Dispatch801321D
Private EMS ProvidersHaynes EMS – Events802322D

Radio system sites in Crenshaw County

Program the control channel first; your scanner finds the voice channels from it.

Lapine · Montgomery Metro Communications Cooperative District
RFSS 24 · Site 24 (hex 18) · NAC 6EB
Control 851.175, 851.625, 853.525, 853.7875, 855.4625, 855.7375, 856.2125
Dozier · S and P Communications
Site 4 (hex 4)
Control 151.895
Voice 151.655, 153.3425, 153.53, 154.49
Luverne · S and P Communications
Site 5 (hex 5)
Control 152.9375
Voice 151.5275, 151.6625, 151.805, 153.3425
Lapine · S and P Communications
Site 6 (hex 6)
Control 153.305
Voice 152.9, 153.05, 153.59, 154.4825
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Crenshaw County

Common questions

What frequency does the fire department use in Crenshaw County?

Fire dispatch channels listed for Crenshaw County: Crenshaw County Fire 453.5500 MHz, narrow FM, 664 DPL.

Do fire departments and EMS use a trunked radio system in Crenshaw County?

Yes. Fire and EMS talkgroups are listed for S and P Communications: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Crenshaw County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Crenshaw County?

For Crenshaw County, start with the Lapine site of Montgomery Metro Communications Cooperative District. Its control channels are 851.175, 851.625, 853.525, 853.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Crenshaw County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Crenshaw County are marked encrypted.

Are Crenshaw County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Crenshaw County are marked encrypted.