About Red Level Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Red Level: Covington County Fire 453.8500 MHz, narrow FM, 311 DPL. Trunked: S and P Communications, for example Private EMS Providers talkgroup 801 (hex 321).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: S and P Communications: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Red Level, start with the Red Level site of S and P Communications, about 0 miles away. Its control channels: 152.375 MHz.
Data updated .
Covington County channels that also cover Red Level
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Covington County Fire | Rural Fire Dispatch/Operations | 453.8500 In 458.8500 | 311 DPL | FMN | WNGL464 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Covington County Hospital | Andalusia Regional Hospital | 155.3400 | 91.5 PL | FMN | WQOV201 |
S and P Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Private EMS Providers | Haynes EMS – Dispatch | 801 | 321 | D |
| Private EMS Providers | Haynes EMS – Events | 802 | 322 | D |
Nearest trunked radio sites
Distances are measured from the center of Red Level.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Red Level?
We do not have a fire dispatch channel listed specifically for Red Level. The county-level fire dispatch channels in the same county: Covington County Fire 453.8500 MHz, narrow FM, 311 DPL.
Do fire departments and EMS use a trunked radio system in Red Level?
Yes. The county-level systems that cover Red Level are Fire and EMS talkgroups are listed for S and P Communications: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Red Level?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Red Level?
For Red Level, start with the Red Level site of S and P Communications. Its control channels are 152.375 MHz. Program a control channel first; the scanner finds the voice channels from it.