About Onycha Fire and EMS Frequencies
Quick answer: Fire dispatch for Onycha: Onycha Fire 155.2200 MHz, narrow FM, 172 DPL. Trunked: S and P Communications, for example Private EMS Providers talkgroup 801 (hex 321).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: S and P Communications: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Onycha, start with the Opp site of S and P Communications, about 5 miles away. Its control channels: 152.885, 153.125 MHz.
Data updated .
Onycha conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Onycha Fire | Onycha Fire – Dispatch | 155.2200 | 172 DPL | FMN | WPMT760 |
Covington County channels that also cover Onycha
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Covington County Fire | Rural Fire Dispatch/Operations | 453.8500 In 458.8500 | 311 DPL | FMN | WNGL464 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Covington County Hospital | Andalusia Regional Hospital | 155.3400 | 91.5 PL | FMN | WQOV201 |
S and P Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Private EMS Providers | Haynes EMS – Dispatch | 801 | 321 | D |
| Private EMS Providers | Haynes EMS – Events | 802 | 322 | D |
Nearest trunked radio sites
Distances are measured from the center of Onycha.
Common questions
What frequency does the fire department use in Onycha?
Fire dispatch channels listed for Onycha: Onycha Fire 155.2200 MHz, narrow FM, 172 DPL.
Do fire departments and EMS use a trunked radio system in Onycha?
Yes. The county-level systems that cover Onycha are Fire and EMS talkgroups are listed for S and P Communications: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Onycha?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Onycha?
For Onycha, start with the Opp site of S and P Communications. Its control channels are 152.885, 153.125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Onycha fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Onycha are marked encrypted.