Skip to content

Conecuh County Fire and EMS Frequencies

Conecuh County in Alabama has 3 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 11 cities and communities below for local fire departments and EMS agencies.

About Conecuh County Fire and EMS Frequencies

Quick answer: Fire dispatch for Conecuh County: Conecuh County Fire 453.3500 MHz, narrow FM, no tone. EMS dispatch for Conecuh County: Conecuh County EMS 155.2950 MHz, narrow FM, 203.5 PL (expired). Trunked: Alabama Interoperable Radio System (AIRS), for example Conecuh County Fire talkgroup 27590 (hex 6bc6).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Alabama Interoperable Radio System (AIRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Conecuh County, start with the Evergreen (Fire Tower) site of Alabama Interoperable Radio System (AIRS). Its control channels: 771.93125 MHz.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Conecuh County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Conecuh County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Conecuh County FireConecuh County Fire – Dispatch (not 110.9 PL)453.3500
In 458.3500
FMNKNHU634

EMS Dispatch

EMS Dispatch frequencies for Conecuh County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Conecuh County EMS Expired: Expired 3/22Conecuh County EMS – Dispatch (Star of Life)155.2950203.5 PLFMNWPJW670

Hospitals & Medical

Hospitals & Medical frequencies for Conecuh County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Conecuh County HospitalEvergreen Medical Center – Patient Reports155.3400167.9 PLFMNWQOK961

Conecuh County trunked talkgroups

Alabama Interoperable Radio System (AIRS)

System ID 00A

Alabama Interoperable Radio System (AIRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Conecuh County FireConecuh County Fire – Dispatch275906bc6D

Radio system sites in Conecuh County

Program the control channel first; your scanner finds the voice channels from it.

Evergreen (Fire Tower) · Alabama Interoperable Radio System (AIRS)
RFSS 2 · Site 15 (hex F) · NAC 46F
Control 771.93125
Voice 769.30625, 771.28125
Belleville · Alabama Interoperable Radio System (AIRS)
RFSS 2 · Site 16 (hex 10) · NAC 468
Control 771.71875
Voice 769.76875, 771.01875
Evergreen (Handen Ridge) · Alabama Interoperable Radio System (AIRS)
RFSS 2 · Site 17 (hex 11) · NAC 465
Control 774.91875
Voice 773.99375, 774.43125
Brooks · Alabama Interoperable Radio System (AIRS)
RFSS 2 · Site 18 (hex 12) · NAC 46E
Voice 771.54375, 772.33125, 772.70625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Conecuh County

Common questions

What frequency does the fire department use in Conecuh County?

Fire dispatch channels listed for Conecuh County: Conecuh County Fire 453.3500 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Conecuh County?

EMS dispatch channels listed for Conecuh County: Conecuh County EMS 155.2950 MHz, narrow FM, 203.5 PL (expired).

Do fire departments and EMS use a trunked radio system in Conecuh County?

Yes. Fire and EMS talkgroups are listed for Alabama Interoperable Radio System (AIRS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Conecuh County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Conecuh County?

For Conecuh County, start with the Evergreen (Fire Tower) site of Alabama Interoperable Radio System (AIRS). Its control channels are 771.93125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Conecuh County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Conecuh County are marked encrypted.

Are Conecuh County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Conecuh County are marked encrypted.