Skip to content

Jack Fire and EMS Frequencies

We do not have frequencies listed specifically for Jack in Coffee County, Alabama yet. Countywide channels for Coffee County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Victoria (S and P Communications), about 7 miles away.

About Jack Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Jack: Coffee County Fire 453.7000 MHz, narrow FM, 466 DPL. County-level ems dispatch that covers Jack: Medical Center Enterprise 155.2350 MHz, narrow FM, no tone. Trunked: S and P Communications, for example Coffee County Fire talkgroup 5300 (hex 14b4).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: S and P Communications: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Jack, start with the Victoria site of S and P Communications, about 7 miles away. Its control channels: 153.4475 MHz.

Data updated .

Coffee County channels that also cover Jack

Fire Dispatch

Fire Dispatch frequencies for Coffee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Coffee County FireRural Fire Dispatch453.7000
In 458.7000
466 DPLFMNWQEZ911

EMS Dispatch

EMS Dispatch frequencies for Coffee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Center EnterpriseMedical Center Enterprise – Dispatch155.2350FMNWPKA732

Hospitals & Medical

Hospitals & Medical frequencies for Coffee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Coffee County HospitalElba General Hospital – Patient Reports155.340082.5 PLFMNWQOL212
Coffee County HospitalMedical Center Enterprise – Patient Reports155.3400100.0 PLFMNWQPY557

S and P Communications

S and P Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Coffee County FireCoffee County Fire – Dispatch (County Volunteer)530014b4D
Coffee County FireTri-Community Fire – Tactical531114bfD
Coffee County FireCoffee County Fire – Tactical Channel532014c8D
Private EMS ProvidersHaynes EMS – Dispatch801321D
Coffee County EMSEmergency Management (County EMA)2601a29D
Private EMS ProvidersHaynes EMS – Events802322D

Nearest trunked radio sites

Distances are measured from the center of Jack.

Victoria · S and P Communications
Site 21 (hex 15) · about 7 mi away
Control 153.4475
Voice 152.4125, 153.4025
Elba · S and P Communications
Site 8 (hex 8) · about 10 mi away
Control 151.775
Voice 152.27, 152.36, 153.0125, 153.365
New Brockton (*) · S and P Communications
Site 17 (hex 11) · about 14 mi away
Control 154.43
Voice 156.1275, 158.8425, 159.4425

Common questions

What frequency does the fire department use in Jack?

We do not have a fire dispatch channel listed specifically for Jack. The county-level fire dispatch channels in the same county: Coffee County Fire 453.7000 MHz, narrow FM, 466 DPL.

What frequency does EMS or the ambulance service use in Jack?

We do not have a EMS dispatch channel listed specifically for Jack. The county-level EMS dispatch channels in the same county: Medical Center Enterprise 155.2350 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Jack?

Yes. The county-level systems that cover Jack are Fire and EMS talkgroups are listed for S and P Communications: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Jack?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Jack?

For Jack, start with the Victoria site of S and P Communications. Its control channels are 153.4475 MHz. Program a control channel first; the scanner finds the voice channels from it.