Skip to content

Millerville Fire and EMS Frequencies

We do not have frequencies listed specifically for Millerville in Clay County, Alabama yet. Countywide channels for Clay County that may also cover this area are shown below when we have them. The closest trunked radio site we have is New Site (Goldville) (Alexander City/Tallapoosa County Public Safety), about 11 miles away.

About Millerville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Millerville: Clay County Fire 151.1525 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Millerville: Clay County EMS 159.1800 MHz, narrow FM, 156.7 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Clay County channels that also cover Millerville

Fire Dispatch

Fire Dispatch frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County FireSouth – Dispatch/Operations (110.9 in)151.1525
In 153.7775
146.2 PLFMNWQFG408
Clay County FireClay County Fire – Dispatch /Operations (Millerville/SouthCentral)154.1450
In 150.7900
146.2 PLFMNWPKP483
Clay County FireAshland/Lineville Fire155.6400146.2 PLFMNWPFH222
Clay County FireClay County Fire – Operations (State)453.6250
In 458.6250
606 DPLFMNKNCL537

EMS Dispatch

EMS Dispatch frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County EMSRescue Squad-Ambulances159.1800
In 153.8900
156.7 PLFMNKNNY610

Hospitals & Medical

Hospitals & Medical frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County HospitalHEAR – Patient Reports155.3400146.2 PLFMNWQPZ543

Nearest trunked radio sites

Distances are measured from the center of Millerville.

New Site (Goldville) · Alexander City/Tallapoosa County Public Safety
Site 1 (hex 1) · about 11 mi away
Voice 152.5625, 152.7125, 155.1525, 155.8275
Alexander City · Alexander City/Tallapoosa County Public Safety
Site 4 (hex 4) · about 17 mi away
Voice 152.1725, 154.175, 154.86
Talladega County Simulcast · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 30 (hex 1E) · NAC 460 · about 19 mi away
Control 769.59375, 770.81875, 771.16875, 771.41875
Voice 771.69375, 772.06875, 772.36875, 772.76875, 774.38125, 774.63125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Millerville?

We do not have a fire dispatch channel listed specifically for Millerville. The county-level fire dispatch channels in the same county: Clay County Fire 151.1525 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Millerville?

We do not have a EMS dispatch channel listed specifically for Millerville. The county-level EMS dispatch channels in the same county: Clay County EMS 159.1800 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Millerville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Millerville?

For Millerville, start with the Talladega County Simulcast site of Alabama Interoperable Radio System (AIRS). Its control channels are 769.59375, 770.81875, 771.16875, 771.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.