Skip to content

Five Points Fire and EMS Frequencies

We do not have frequencies listed specifically for Five Points in Chambers County, Alabama yet. Countywide channels for Chambers County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Daviston (Alexander City/Tallapoosa County Public Safety), about 17 miles away.

About Five Points Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Five Points: Chambers County Fire 453.1500 MHz, narrow FM, 073 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Chambers County channels that also cover Five Points

Fire Dispatch

Fire Dispatch frequencies for Chambers County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chambers County FireChambers County Fire – Dispatch A453.1500
In 458.1500
073 DPLFMNKNAU453
Chambers County FireChambers County Fire – Dispatch B453.2375
In 458.2375
FMNWQCU997

Nearest trunked radio sites

Distances are measured from the center of Five Points.

Daviston · Alexander City/Tallapoosa County Public Safety
Site 6 (hex 6) · about 17 mi away
Voice 155.415, 155.535
Opelika · Alabama Interoperable Radio System (AIRS)
RFSS 3 · Site 11 (hex B) · NAC 460 · about 25 mi away
Control 854.0375, 854.3875, 854.4875, 854.6375
Voice 854.7875, 854.9375, 855.0375, 855.1875, 855.4625, 855.7375, 855.9625, 856.1875, 856.2125, 856.4875, 856.7375, 856.9125, 857.0375, 857.2125, 857.4875
New Site (Goldville) · Alexander City/Tallapoosa County Public Safety
Site 1 (hex 1) · about 26 mi away
Voice 152.5625, 152.7125, 155.1525, 155.8275
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Five Points?

We do not have a fire dispatch channel listed specifically for Five Points. The county-level fire dispatch channels in the same county: Chambers County Fire 453.1500 MHz, narrow FM, 073 DPL.

What scanner do I need to listen to fire and EMS in Five Points?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Five Points?

For Five Points, start with the Opelika site of Alabama Interoperable Radio System (AIRS). Its control channels are 854.0375, 854.3875, 854.4875, 854.6375 MHz. Program a control channel first; the scanner finds the voice channels from it.