About Vance Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Vance: Bibb County Fire 453.2000 MHz, narrow FM, 306 DPL. County-level ems dispatch that covers Vance: Bibb County EMS 155.7300 MHz, narrow FM, 107.2 PL. Trunked: Alabama Interoperable Radio System (AIRS), for example Bibb County EMS talkgroup 45004 (hex afcc).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Alabama Interoperable Radio System (AIRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Vance, start with the Duncanville site of Alabama Interoperable Radio System (AIRS), about 12 miles away. Its control channels: 852.3375, 853.2 MHz.
Data updated .
Bibb County channels that also cover Vance
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bibb County Fire | Bibb County Fire – Countywide | 453.2000 In 458.2000 | 306 DPL | FMN | KNAU436 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bibb County EMS | Bibb County EMS – Dispatch | 155.7300 In 154.8300 | 107.2 PL | FMN | WNXC359 |
Alabama Interoperable Radio System (AIRS)
System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bibb County EMS | Bibb County EMS – Dispatch | 45004 | afcc | D |
Nearest trunked radio sites
Distances are measured from the center of Vance.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Vance?
We do not have a fire dispatch channel listed specifically for Vance. The county-level fire dispatch channels in the same county: Bibb County Fire 453.2000 MHz, narrow FM, 306 DPL.
What frequency does EMS or the ambulance service use in Vance?
We do not have a EMS dispatch channel listed specifically for Vance. The county-level EMS dispatch channels in the same county: Bibb County EMS 155.7300 MHz, narrow FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in Vance?
Yes. The county-level systems that cover Vance are Fire and EMS talkgroups are listed for Alabama Interoperable Radio System (AIRS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Vance?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Vance?
For Vance, start with the Duncanville site of Alabama Interoperable Radio System (AIRS). Its control channels are 852.3375, 853.2 MHz. Program a control channel first; the scanner finds the voice channels from it.