Skip to content

Active Fire and EMS Frequencies

We do not have frequencies listed specifically for Active in Bibb County, Alabama yet. Countywide channels for Bibb County that may also cover this area are shown below when we have them.

About Active Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Active: Bibb County Fire 453.2000 MHz, narrow FM, 306 DPL. County-level ems dispatch that covers Active: Bibb County EMS 155.7300 MHz, narrow FM, 107.2 PL. Trunked: Alabama Interoperable Radio System (AIRS), for example Bibb County EMS talkgroup 45004 (hex afcc).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Alabama Interoperable Radio System (AIRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.

Data updated .

Bibb County channels that also cover Active

Fire Dispatch

Fire Dispatch frequencies for Bibb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bibb County FireBibb County Fire – Countywide453.2000
In 458.2000
306 DPLFMNKNAU436

EMS Dispatch

EMS Dispatch frequencies for Bibb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bibb County EMSBibb County EMS – Dispatch155.7300
In 154.8300
107.2 PLFMNWNXC359

Alabama Interoperable Radio System (AIRS)

System ID 00A

Alabama Interoperable Radio System (AIRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Bibb County EMSBibb County EMS – Dispatch45004afccD

Common questions

What frequency does the fire department use in Active?

We do not have a fire dispatch channel listed specifically for Active. The county-level fire dispatch channels in the same county: Bibb County Fire 453.2000 MHz, narrow FM, 306 DPL.

What frequency does EMS or the ambulance service use in Active?

We do not have a EMS dispatch channel listed specifically for Active. The county-level EMS dispatch channels in the same county: Bibb County EMS 155.7300 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Active?

Yes. The county-level systems that cover Active are Fire and EMS talkgroups are listed for Alabama Interoperable Radio System (AIRS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Active?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.