Skip to content

Riverside Heliport (MT10) Frequencies

Riverside Heliport (MT10) is a private-use heliport 2 nautical miles ssw of Kalispell, Montana. It has no control tower; the UNICOM frequency is 122.80 MHz.

Quick answer: Riverside frequencies

  • UNICOM 122.80 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Riverside

  • 1 radio frequency is listed for Riverside by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 40 ft (H1).
  • Field elevation 2,930 ft above sea level.
  • Responsible air route traffic control center: ZLC.

Riverside radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

UNICOM

UNICOM
Frequency (MHz)Service Notes
122.80 UNICOM Provided VFR opns and pvt use only; Class d airspace weather and communication rules apply; Heliport pilot should monitor UNICOM for kalispell city airport opns.

Riverside runways

Runways at Riverside
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
H1 40 ft 40 ft Concrete (good)

FAA remarks

  • Sml unmanned aircraft actvty dalgt and ngt below 400 feet AGL in ceas. Do hi recon bfr des below 3500 feet MSL for fa.
  • For cd contact salt lake ARTCC at 801-320-2568.

Location and details

Identifier
MT10
Type
Heliport, private use
Location
Kalispell, Flathead County, Montana
Coordinates
48.2155, -114.2980
Elevation
2,930 ft
Control tower
No
Controlling facilities
Salt Lake City Center

Frequently asked questions

What is the UNICOM frequency at Riverside?

The UNICOM frequency at Riverside is 122.80 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Riverside have?

Riverside has 1 runway: H1 (40 by 40 ft).

What is the elevation of Riverside?

Riverside is 2,930 feet above sea level.

Can I listen to Riverside on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Riverside