Skip to content

Gentner Strip (MI03) Frequencies

Gentner Strip (MI03) is a private-use airport 1 nautical mile ese of Ruth, Michigan. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Gentner Strip frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Gentner Strip

  • 1 radio frequency is listed for Gentner Strip by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 1,297 ft (01/19).
  • Field elevation 747 ft above sea level.
  • Responsible air route traffic control center: ZOB.

Gentner Strip radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.90 CTAF

Gentner Strip runways

Runways at Gentner Strip
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
01/19 1,297 ft 50 ft CONC-GRVL

FAA remarks

  • For cd contact cleveland ARTCC at 440-774-0224/0490.

Location and details

Identifier
MI03
Type
Airport, private use
Location
Ruth, Huron County, Michigan
Coordinates
43.7036, -82.7101
Elevation
747 ft
Control tower
No
Controlling facilities
Cleveland Center

Frequently asked questions

What is the CTAF frequency for Gentner Strip?

The common traffic advisory frequency (CTAF) for Gentner Strip is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Gentner Strip have?

Gentner Strip has 1 runway: 01/19 (1,297 by 50 ft).

What is the elevation of Gentner Strip?

Gentner Strip is 747 feet above sea level.

Can I listen to Gentner Strip on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Gentner Strip