Skip to content

Catron County Heliport (C54) Frequencies

Catron County Heliport (C54) is a public-use heliport 8 nautical miles east of Quemado, New Mexico. It has no control tower; pilots announce on the CTAF, 122.80 MHz.

Quick answer: Catron County frequencies

  • CTAF 122.80 MHz
  • UNICOM 122.80 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Catron County

  • 2 radio frequencies are listed for Catron County by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 65 ft (H1).
  • Field elevation 7,205 ft above sea level.
  • Responsible air route traffic control center: ZAB.

Catron County radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.80 CTAF

UNICOM

UNICOM
Frequency (MHz)Service
122.80 UNICOM

Catron County runways

Runways at Catron County
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
H1 65 ft 65 ft Concrete (good) Perimeter

FAA remarks

  • Elk invof heli.
  • Aces code 2467.
  • For cd contact albuquerque ARTCC at 505-856-4861.

Location and details

Identifier
C54
Type
Heliport, open to the public
Location
Quemado, Catron County, New Mexico
Coordinates
34.3157, -108.3099
Elevation
7,205 ft
Control tower
No
Controlling facilities
Albuquerque Center

Frequently asked questions

What is the CTAF frequency for Catron County?

The common traffic advisory frequency (CTAF) for Catron County is 122.80 MHz. Confirm on a current chart before flying; frequencies can change.

What is the UNICOM frequency at Catron County?

The UNICOM frequency at Catron County is 122.80 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Catron County have?

Catron County has 1 runway: H1 (65 by 65 ft).

What is the elevation of Catron County?

Catron County is 7,205 feet above sea level.

Can I listen to Catron County on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Catron County