Quick answer: Bannock frequencies
- CTAF 122.90 MHz
FAA data cycle effective October 29, 2026. Verify against a current chart before flying.
About Bannock
- 3 radio frequencies are listed for Bannock by the FAA.
- No control tower: traffic is uncontrolled and pilots self-announce.
- 1 runway, the longest 20 ft (H1).
- Field elevation 1,100 ft above sea level.
- Responsible air route traffic control center: ZOB.
Bannock radio frequencies
Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.
Center (ARTCC)
| Frequency (MHz) | Service | Sector or runway | Provided by | Notes |
|---|---|---|---|---|
| 126.95 | Center (ARTCC) remote | Low | Belmont | Approach/departure service provided by cleveland ARTCC (zob) 126.95/239.3 (belmont RCAG). |
CTAF
| Frequency (MHz) | Service |
|---|---|
| 122.90 | CTAF |
1 military (UHF) frequency (225 to 400 MHz)
Military UHF
| Frequency (MHz) | Service | Sector or runway | Provided by | Notes |
|---|---|---|---|---|
| 239.30 | Center (ARTCC) remote | Low | Belmont | Approach/departure service provided by cleveland ARTCC (zob) 126.95/239.3 (belmont RCAG). |
Bannock runways
| Runway | Length | Width | Surface | Lighting | Instrument approach and pattern |
|---|---|---|---|---|---|
| H1 | 20 ft | 20 ft | Concrete (fair) |
FAA remarks
- For cd contact cleveland ARTCC at 440-774-0226/0490.
- Approach/departure service provided by cleveland ARTCC (zob) 126.95/239.3 (belmont RCAG).
Location and details
- Identifier
- 2D6
- Type
- Heliport, open to the public
- Location
- Bannock, Belmont County, Ohio
- Coordinates
- 40.1070, -80.9754
- Elevation
- 1,100 ft
- Control tower
- No
- Controlling facilities
- Cleveland Center
Frequently asked questions
What is the CTAF frequency for Bannock?
The common traffic advisory frequency (CTAF) for Bannock is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.
How many runways does Bannock have?
Bannock has 1 runway: H1 (20 by 20 ft).
What is the elevation of Bannock?
Bannock is 1,100 feet above sea level.
Can I listen to Bannock on a scanner?
Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.
Airports near Bannock
- Alderman (2P7), St Clairsville, 3 nautical miles away
- Andrew J Ciechomski Memorial (OH90), St Clairsville, 4 nautical miles away
- Harrison County (8G6), Cadiz, 8 nautical miles away
- Barnesville/Bradfield (6G5), Barnesville, 12 nautical miles away
- West Virginia State Police (2WV6), Wheeling, 12 nautical miles away
- Glendale Fokker Field (WV66), Glendale, 14 nautical miles away
- Wheeling Ohio County (HLG / KHLG), Wheeling, 16 nautical miles away
- Marshall County (MPG / KMPG), Moundsville, 17 nautical miles away