Skip to content

Alpine County Airport (M45) Frequencies

Alpine County Airport (M45) is a public-use airport 3 nautical miles north of Markleeville, California. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Alpine County frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Alpine County

  • 1 radio frequency is listed for Alpine County by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 4,443 ft (17/35).
  • Field elevation 5,872 ft above sea level.
  • Responsible air route traffic control center: ZOA.

Alpine County radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.90 CTAF

Alpine County runways

Runways at Alpine County
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
17/35 4,443 ft 50 ft Asphalt (poor) 35: right-hand traffic

FAA remarks

  • Large stones along edge of runway off graded surface.
  • No snow removal, airport closed when snow on runway.
  • Trees penetrating transitional sfcs e & w of ry.
  • Soil conditions off ry is poor in wet conditions. Call public works for additional information 530-694-2140 ext."0".
  • Ry 17/35 limited by airport operator to 4,800 lbs single wheel, 9,600 lbs dual wheel.
  • For cd contact oakland ARTCC at 510-745-3380.

Location and details

Identifier
M45
Type
Airport, open to the public
Location
Markleeville, Alpine County, California
Coordinates
38.7348, -119.7671
Elevation
5,872 ft
Control tower
No
Controlling facilities
Oakland Center

Frequently asked questions

What is the CTAF frequency for Alpine County?

The common traffic advisory frequency (CTAF) for Alpine County is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Alpine County have?

Alpine County has 1 runway: 17/35 (4,443 by 50 ft).

What is the elevation of Alpine County?

Alpine County is 5,872 feet above sea level.

Can I listen to Alpine County on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Alpine County